DK MedCom Condition List
1.0.1 - release

This page is part of the DK MedCom Condition List (v1.0.1: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: MedComConditionListBundle - Detailed Descriptions

Active as of 2025-05-13

Definitions for the medcom-conditionlist-bundle resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Bundle
Definition

A container for a collection of resources.

ShortContains a collection of resources
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsbdl-1: total only when a search or history (total.empty() or (type = 'searchset') or (type = 'history'))
bdl-2: entry.search only when a search (entry.search.empty() or (type = 'searchset'))
bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited (entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history')))
bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited (entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history')))
bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) ((type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct())
bdl-9: A document must have an identifier with a system and a value (type = 'document' implies (identifier.system.exists() and identifier.value.exists()))
bdl-10: A document must have a date (type = 'document' implies (timestamp.hasValue()))
bdl-11: A document must have a Composition as the first resource (type = 'document' implies entry.first().resource.is(Composition))
bdl-12: A message must have a MessageHeader as the first resource (type = 'message' implies entry.first().resource.is(MessageHeader))
bdl-1: total only when a search or history (total.empty() or (type = 'searchset') or (type = 'history'))
bdl-2: entry.search only when a search (entry.search.empty() or (type = 'searchset'))
bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited (entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history')))
bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited (entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history')))
bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) ((type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct())
bdl-9: A document must have an identifier with a system and a value (type = 'document' implies (identifier.system.exists() and identifier.value.exists()))
bdl-10: A document must have a date (type = 'document' implies (timestamp.hasValue()))
bdl-11: A document must have a Composition as the first resource (type = 'document' implies entry.first().resource.is(Composition))
bdl-12: A message must have a MessageHeader as the first resource (type = 'message' implies entry.first().resource.is(MessageHeader))
2. Bundle.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control10..1
Typeidstring
Is Modifierfalse
Must Supporttrue
Summarytrue
4. Bundle.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Bundle.identifier
Definition

A persistent identifier for the bundle that won't change as a bundle is copied from server to server.

ShortPersistent identifier for the bundle
Comments

Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..1
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Bundle.type
Definition

Indicates the purpose of this bundle - how it is intended to be used.

ShortAlways a documentdocument | message | transaction | transaction-response | batch | batch-response | history | searchset | collection
Comments

It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types.

Control1..1
BindingThe codes SHALL be taken from BundleTypehttp://hl7.org/fhir/ValueSet/bundle-type|4.0.1
(required to http://hl7.org/fhir/ValueSet/bundle-type|4.0.1)

Indicates the purpose of a bundle - how it is intended to be used.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Pattern Valuedocument
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Bundle.timestamp
Definition

The date/time that the bundle was assembled - i.e. when the resources were placed in the bundle.

ShortWhen the bundle was assembled
Comments

For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated.

Usage:

  • document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time
  • message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message
  • history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates
  • searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query
  • transaction | transaction-response | batch | batch-response | collection : no particular assigned meaning

The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself.

Control10..1
Typeinstant
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Bundle.entry
Definition

An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

ShortEntry in the bundle - will have a resource or information
Control10..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
SlicingThis element introduces a set of slices on Bundle.entry. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • type @ $this.resource
  • 14. Bundle.entry.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Bundle.entry.fullUrl
    Definition

    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortURI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Bundle.entry.resource
    Definition

    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    ShortA resource in the bundle
    Control10..1
    TypeResource
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    20. Bundle.entry:medcom-conditionlist-composition
    Slice Namemedcom-conditionlist-composition
    Definition

    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    ShortFirst entry is a compositionEntry in the bundle - will have a resource or information
    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    22. Bundle.entry:medcom-conditionlist-composition.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    24. Bundle.entry:medcom-conditionlist-composition.fullUrl
    Definition

    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortURI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Bundle.entry:medcom-conditionlist-composition.resource
    Definition

    A set of healthcare-related information that is assembled together into a single logical package that provides a single coherent statement of meaning, establishes its own context and that has clinical attestation with regard to who is making the statement. A Composition defines the structure and narrative content necessary for a document. However, a Composition alone does not constitute a document. Rather, the Composition must be the first entry in a Bundle where Bundle.type=document, and any other resources referenced from Composition must be included as subsequent entries in the Bundle (for example Patient, Practitioner, Encounter, etc.).


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    ShortA set of resources composed into a single coherent clinical statement with clinical attestationA resource in the bundle
    Comments

    While the focus of this specification is on patient-specific clinical statements, this resource can also apply to other healthcare-related statements such as study protocol designs, healthcare invoices and other activities that are not necessarily patient-specific or clinical.

    Control10..1
    TypeCompositionResource(MedComConditionListComposition)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse